The GPSC has released the job openings for AIMV following the official announcement. The GPSC AIMV (Assistant Inspector Motor Vehicle) exam is regarded as one of the most challenging yet rewarding government examinations in Gujarat. Eligible engineering disciplines for the GPSC AIMV Exam include Mechanical Engineering and Automobile Engineering. Consequently, engineers from these fields can take advantage of the opportunities this exam offers to qualified candidates.
Table of Content:
- Vacancy:
- Eligibility
- Education Qualification:
- Physical Standard:
- Exam Pattern:
- Syallabus:
- FAQ:
- Online Class and test series and book:
Vacancy: Total- 153(General 42, EWS-35, SEBC- 39 ,Sc-15,St-22)
Eligibility : Indian
Age : 19 to 35 Years
Education Qualification:
(i) Possess a Diploma in Mechanical Engineering (3 yrs. course) or Diploma in Automobile Engineering (3 yrs. course) obtained from any of the Universities established or incorporated by or under the Central or a State Act in India; or any other educational institution recognised as such or declared to be a deemed as a University under section 3 of the University Grants Commission Act, 1956, or (ii) Bechelor’s degree in Mechanical engineering or Automobile Engineering of any of the Universities established or incorporated by or under the Central or a State Act in India; or any othe educational institution recognized as such or declared to be a deemed as a University under section 3 of the University Grants Commission Act, 1956;
(2) The candidate shall possess the basic knowledge of Computer Application as prescribed in the Gujarat Civil Service Classification and Recruitment (General) Rules, 1967
(3) The candidate shall hold a driving license authorizing to drive motorcycle with gear and light motor Vehicles at the time of appointment
(4) The candidate shall possess adequate knowledge of Gujarati or Hindi or both.
Physical Standard:
Minimum Requisites Standard of Physique: -
1. (A) For Male candidates:
Sr. No. | Class | Height | Chest | Weight | |
Deflated | Inflated* | ||||
1 | Scheduled Tribes of Gujarat Origin. | 158 cm | 79 cm | 84 cm | 50 Kg |
2 | Candidate (except Scheduled Tribes of Gujarat origin). | 162 cm | 79 cm | 84 cm | 50 Kg |
* Minimum expansion of chest when inflated shall not be less than 5 Centimetres.
(B) For Female candidates:
Sr. No. | Class | Height | Weight |
1 | Scheduled Tribes of Gujarat Origin. | 155 cm | 45 Kg |
2 | Candidate (except Scheduled Tribes of Gujarat origin). | 158 cm | 45 Kg |
2. The candidates who have any one or more of the following physical defects shall be considered physically unfit: Knock knee, Pigeon Chest, Squint Eye, Flat Feet, Varicose Veins, Hammer Toes, Fractured Limb, Decayed Teeth, Communicable Skin Disease.
3. A Candidate shall not be colour blind and have a clear vision with or without glasses.
4. (SHAPE I) Means
S-Psychological
H-Hearing
A-Appendage
P-Physical Capacity for Normal Work
E-Eye Sight
I-Mean Fit in All Respects to Perform Normal Professional Functions Under
Each of The Above-Mentioned Heads.
Exam Pattern:
PAPER | Part | SUBJECT | MARKS | DURATION |
Paper | Part-A | Concerned Subject | 125 |
3 Hours |
Part-B | Act/Rules/Guideline/Institute/Judgements | 75 | ||
Part-C | Gujarati | 50 | ||
|
| Total | 250 |
|
Final selection will be based on getting marks out of 250.
Syllabus:
Part A: Concerned Subjects
Total Questions: 125 Total Marks: 125 Medium: English & Gujarati
1. ENGINEERING DRAWING: Engineering Curves, orthographic and isometric projections, fasteners – Projection of points, Lines & Planes, Limits Fits and Tolerances.
2. ENGINEERING MECHANICS: Centroid & center of gravity, Coplanar concurrent forces, Coplanar parallel and nonconcurrent forces Friction, Rectilinear motion, Curvilinear motion- centripetal force, Work-Power-Energy, Simple machines.
3. THEORY OF MACHINES AND MACHINE DESIGN: General consideration in Machine Design, Fundamental units, Derived units, Stress & Strain, Bearing Stress, Torsional & Bending stress, power transmission, flywheel and Governor, Frictional clutches and Brakes, Gears and Bearings, Balancing and Vibration.
4. NON-CONVENTIONAL ENERGY SOURCES: Renewable sources of Energy such as Hydro, Solar, Wind, Bio mass, Tidal and Geo Thermal Energy.
5. THERMODYNAMICS AND THERMAL ENGINEERING: Basic concepts of Thermodynamics –first and second law of thermodynamics thermodynamic cycles, fluid statics, kinematics and dynamics. Flow measurements, orifice and pipes, impact of jet, working of pumps, modes of heat transfer, fundamentals of refrigeration and air conditioning.
6. INTERNAL COMBUSTION ENGINES: I C engines – part and their functions, I C engines – types and classification, types of fuels used in I C engines and their properties, Working of Petrol and Diesel engines, fuel injection systems – for Petrol, Diesel, LPG and CNG, MPFI, Cooling & lubricating system of IC engine, Combustion Process, performance test on IC engine, Eco friendly fuels-conventional, LPG, CNG, Bio fuel Page 6 of 9
7. MATERIALS AND MANUFACTURING ENGINEERING: Engineering Materials, Heat treatment processes, Metal working, metal casting and metal joining processes, basic machine tools. Conventional manufacturing processes like Turning, Welding, Shaping, Molding, Foundry Technology, Drilling etc.
8. AUTOMOBILE ENGINEERING: Anotomy of vehicles, Automobile Systems - Necessity of clutch, Types of clutch, Constructional and functional details of clutch, Necessity of Transmission, Types of Transmission system, Brake and suspension systems, control systems, conventional steering and power steering, Electrical systems- for starting, ignition and lighting, repairs and maintenance of automobiles.
9. COMPUTER AIDED DESIGN AND COMPUTER AIDED MANUFACTURING (CAD/CAM): CAD work station, Graphic packages-types and features, Geometric modeling, Various CAD softwares, Introduction to CNC machines- constructional features and working. Automatic tool changer (ATC) and Automatic pallet changer (APC). CNC Part Programming.
10. POLLUTION AND VEHICLE INSURANCE Exhaust gasses emission control systems. CNG conversion, Vehicle noise and its control. National and International standard norms for exhaust gas pollution control. PUC Certification. Licensing, Regulations of motor vehicles, Motor vehicle insurance
11. DIAGNOSIS AND TESTING OF VEHICLE: Testing of various elements of the vehicle systems-Battery, clutch, brakes, wheels and tyres (wheel alignment, wheel balancing), etc. Performance test.
Part-B: Acts/Rules/Guideline/Institute/Judgements Total Questions: 75 Total Marks: 75 Medium: English& Gujarati
1. The Motor Vehicle Act 1988 (with 2019 amendments)
2. The Central Motor Vehicles Rules, 1989 (CMVR)
Chapter I : Preliminary
Chapter II : Licensing of Driving of Motor Vehicles
Chapter III : Registration of Motor Vehicles
Chapter IV : Control of Transport Vehicles
Chapter V : Construction Equipment & Maintenance of Motor Vehicle
3. THE GUJARAT MOTOR VEHICLES RULES, 1989
Chapter I: Preliminary
Chapter II: Licensing of Drivers of Motor Vehicles
Chapter III: Licensing of Conductors of Stage Carriages
Chapter IV: Registration of Motor Vehicles
Chapter V: Control of Transport Vehicles
Chapter VII: Construction Equipment & Maintenance of Motor Vehicle
4. Gujarat Road Safety Policy 2016-17
5. Motor Vehicle (Driving) Regulations, 2017
6. Gujarat Road Safety Authority Act 2018
7. Supreme Court Committee on Road Safety guidelines
8. National Green Tribunal
9. Traffic Signs, Road Markings and Road Furniture
10. Latest Technology in Vehicle Manufacturing related to Road Safety & Environment (including Bio Fuels)
11. Electric Vehicles
12. Landmark Judgement of Hon.Supreme Court related Road safety and Road and vehicle organisation:
i. in the Supreme Court of India Civil Appeal no. 5826 of 2011 Mukund Dewangan vs the Oriental Insurance Co. Ltd. Etc… (Regarding No Necessity of obtaining endowments to drive the transport vehicles when the transport vehicle is class of light motor vehicles (LMV).) Page 8 of 9
ii. In the Supreme Court of India write petition (Civil) No. 265 of 2011 Avishek Goenka vs Union of India & Anr. (Regarding Restriction of use of Black film on the vehicles)
iii. In the Supreme Court of India write petition (Civil) No. 235 of 2012 Save life Foundation & Anr. Vs Union of India & Anr. (Regarding No harassment to Samaritans i.e. bystanders for helping road accidents victim)
iv. In the Supreme Court of India (Civil) appeal No. 11369 of 2018 Prakash Chand Doga vs Savita Sharma & Anr. (Regarding in accidents cases all the liabilities are of vehicles registered owner)
v. In the Supreme Court of India writ petition (Civil) 510 of 2005 Maniderjit Singh Bitta vs Union of India & Anr. (Regarding Scheme regulating issuance and fixation of High Security Registration Plates (HSRP))
vi. In the Supreme Court of India write petition (Civil) No. 243 of 2005 Rajive Raturi vs Union of India & Others (Regarding For Divyang People safe access to road and transport facilities)
Part-C (Gujarati) કલ પ્રશ્નો-૫૦ કલ ગણ-૫૦
1. ગધાર્થગ્રહણ
2. કહવતો
3. રૂઢિપ્રયોગો
4. સમાનાર્ી શબ્દો
5. વવરધ્ધાર્ી શબ્દો
6. જોડણી
7. અલંકાર
8. સમાસ
9. શબ્દસમૂહો માટ સામાવસક ક પાઢરભાવિક શબ્દો
10. સંવધ
11. છંદ
Frequently Asked Questions (FAQs)
Q1. Can candidates from other states apply for this position?
Yes, they all will be counted as in general.
Q2. What is the minimum educational qualification required to apply for the examination?
Diploma or Degree in Mechanical and Automobile.
Q3. Is there any CGPA restriction in filling the form?
There are no restrictions on CGPA as well as on percentage.
Q4. Can ITI + diploma student fills the form?
Q5. Can Production Engineering apply for this post?
No, only mechanical and automobile are eligible.
Q6. Which type of licence is required and when?
The candidate shall hold a driving license authorizing to drive motorcycle with gear and
light motor Vehicles at the time of appointment.
Q7. Is license is required during filling up the form?
Ans. No
Q8. Is NOC is needed during application filling form for those who are working in government?
Ans. During document verification NOC will be needed.
Q9. What are the physical standards required for this position?
Minimum Requisites Standard of Physique: -
1. (A) For Male candidates:
Sr. No. | Class | Height | Chest | Weight | |
Deflated | Inflated* | ||||
1 | Scheduled Tribes of Gujarat Origin. | 158 cm | 79 cm | 84 cm | 50 Kg |
2 | Candidate (except Scheduled Tribes of Gujarat origin). | 162 cm | 79 cm | 84 cm | 50 Kg |
* Minimum expansion of chest when inflated shall not be less than 5 Centimetres.
(B) For Female candidates:
Sr. No. | Class | Height | Weight |
1 | Scheduled Tribes of Gujarat Origin. | 155 cm | 45 Kg |
2 | Candidate (except Scheduled Tribes of Gujarat origin). | 158 cm | 45 Kg |
2. The candidates who have any one or more of the following physical defects shall be considered physically unfit: Knock knee, Pigeon Chest, Squint Eye, Flat Feet, Varicose Veins, Hammer Toes, Fractured Limb, Decayed Teeth, Communicable Skin Disease.
3. A Candidate shall not be colour blind and have a clear vision with or without glasses.
4. (SHAPE I) Means
S-Psychological
H-Hearing
A-Appendage
P-Physical Capacity for Normal Work
E-Eye Sight
I-Mean Fit in All Respects to Perform Normal Professional Functions Under
Each of The Above-Mentioned Heads.
Q10. Physical standard for PH candidate?
The candidates who have any one or more of the following physical defects shall be considered physically unfit: Knock knee, Pigeon Chest, Squint Eye, Flat Feet, Varicose Veins, Hammer Toes, Fractured Limb, Decayed Teeth, Communicable Skin Disease.
Q11. Iron rod is inserted into my hand after accident am I eligible for apply?
Ans. If it comes under the eligibility then yes you can apply (confirm from GPSC before apply)
Q.11 What is the exam pattern for the preliminary examination?
PAPER | Part | SUBJECT | MARKS | DURATION |
Paper | Part-A | Concerned Subject | 125 |
3 Hours |
Part-B | Act/Rules/Guideline/Institute/Judgements | 75 | ||
Part-C | Gujarati | 50 | ||
|
| Total | 250 |
|
Q12. Is 5 months enough to prepare for this Exam?
Ans. Yes, it is enough time crack this examination.
Q13. Can 4th year student fills the form?
Ans. No
Q14. Is there any online or offline course will be there?
Ans. Yes, update on course will be available on website and app soon.
Q15. Where can I find study material for exam preparation?
Ans. You can buy on from Sankalp education and further details of material will be updated on website and app.
Q16. We are old student of Sankalp can we get the discount?
Ans Those who purchased Sankalp full video course, they will be eligible for discount.
Q17. Can we purchase only Acts and Rule course?
Ans. Yes, Further information will be updated on website and app soon.
Q18. Any updates on ARTO vacancies?
Ans. Right now there is no information, may be updated In GPSC calendar 2025.
Important Links:
To purchase our online and offline Live courses for GPSC AIMV Click here
To purchase our online Recorded courses for GPSC AIMV Click here
To purchase Material and RTO rules book for GPSC AIMV Click here
To purchase test series GPSC for AIMV Click here
